PrintertonerresetFirmwarefixsamsungml2160
How to Fix Firmware Reset for Samsung ML-2160 Printer Toner
If you have a Samsung ML-2160 printer, you may encounter a problem with the toner cartridge. The printer may display a message that the toner is low or empty, even if you have just replaced it. This is because the printer has a chip that counts the number of pages printed and stops working when it reaches a certain limit. To fix this problem, you need to reset the firmware of the printer and the chip of the toner cartridge.
printertonerresetFirmwarefixsamsungml2160
In this article, we will show you how to fix firmware reset for Samsung ML-2160 printer toner in a few easy steps. You will need a USB cable, a computer, and a software tool called eReset. You can download eReset from here. Follow the instructions below to reset your printer and toner.
Step 1: Connect the Printer to the Computer
Turn off your printer and connect it to your computer using a USB cable. Make sure the printer is not connected to any other device or network. Turn on your printer and wait for it to initialize.
Step 2: Print the Configuration Report
To print the configuration report, press and hold both buttons on the printer panel for about 10 seconds. The printer will print two pages with information about the firmware version, serial number, page count, toner level, and other settings. You will need this information later to select the correct firmware file.
Step 3: Run eReset Software
Open eReset software on your computer and select your printer model from the list. Click on "FIX" button and wait for the software to detect your printer. You will see a message that says "Ready for Download Mode".
Step 4: Enter Download Mode
To enter download mode, press and hold both buttons on the printer panel again for about 15 seconds. The printer will make a sound and display a green light. This means that the printer is ready to receive the new firmware file.
Step 5: Select and Send Firmware File
In eReset software, click on "Browse" button and select the firmware file that matches your printer's firmware version and serial number. You can find these information on the configuration report that you printed earlier. Click on "Send Firmware to Printer" button and wait for the process to complete. You will see a message that says "Download Complete".
Step 6: Restart Printer and Toner
Turn off your printer and disconnect it from your computer. Wait for about 10 seconds and turn it on again. The printer will initialize and display a normal status. To reset the toner chip, open the front cover of the printer and press and hold both buttons on the printer panel for about 5 seconds. The printer will make a sound and display a green light. This means that the toner chip has been reset.
Step 7: Enjoy Your Printer and Toner
You have successfully fixed firmware reset for Samsung ML-2160 printer toner. You can now print as many pages as you want without worrying about toner level or expiration date. You can also use compatible or refillable toner cartridges without any problem.
We hope this article was helpful for you. If you have any questions or comments, please leave them below. Thank you for reading!
Benefits of Fixing Firmware Reset for Samsung ML-2160 Printer Toner
By fixing firmware reset for Samsung ML-2160 printer toner, you can enjoy many benefits. Here are some of them:
You can save money by using compatible or refillable toner cartridges. You don't have to buy original Samsung toner cartridges that are expensive and hard to find.
You can extend the life of your printer and toner. You don't have to replace them as often as before.
You can improve the quality of your prints. You don't have to worry about low toner level or expiration date that can affect the print quality.
You can reduce the environmental impact of your printing. You don't have to throw away used toner cartridges that can pollute the landfills.
Tips for Fixing Firmware Reset for Samsung ML-2160 Printer Toner
To fix firmware reset for Samsung ML-2160 printer toner successfully, you need to follow some tips. Here are some of them:
Make sure you have a USB cable, a computer, and eReset software before you start the process.
Make sure you select the correct firmware file that matches your printer's firmware version and serial number.
Make sure you enter download mode correctly by pressing and holding both buttons on the printer panel.
Make sure you restart your printer and toner after sending the firmware file.
Make sure you test your printer and toner after fixing firmware reset. Print a test page or a document to check if everything works fine.
Conclusion
In conclusion, fixing firmware reset for Samsung ML-2160 printer toner is a simple and effective way to solve the problem of toner low or empty message. You can do it yourself in a few minutes with a USB cable, a computer, and eReset software. You can also enjoy many benefits such as saving money, extending the life of your printer and toner, improving the quality of your prints, and reducing the environmental impact of your printing. We hope this article was helpful for you. If you have any questions or comments, please leave them below. Thank you for reading! 6c859133af
https://soundcloud.com/galamabugyao/microsoft-word-cracked-free-better-download-softonic
https://soundcloud.com/mayilenecoox/internet-download-manager-repack-by-kpojiuk
https://soundcloud.com/gruskarifhanr/beauty-box-premiere-pro-crack-full-windows-10