top of page

First Filipino Canad Group

Public·63 members
David Sanders
David Sanders

Leica Geo Office 8 3 Keygen ##HOT## 19



Edit to above post: I was finally able to reset my password, but unable to find a place to download the software. I don't have the receiver here with me at the office, the crews have it in the field. I'll have to register it this afternoon or this weekend.




Leica Geo Office 8 3 Keygen 19



With the Mesa 3 or Mesa 2 running Windows 10 you will be able to run all the desktop-class programs on the device. This gives you the flexibility you need to have your office anywhere. For processor-intensive programs consider the Mesa 3.


In short yes! The Mesa 3 is a complete computer in a compact rugged form factor. The Windows 10 OS is the same as any laptop or desktop PC. This allows you to run all your data collection apps office software etc. The optional Mesa dock allows for a traditional office experience for the Mesa. Just sit down dock and work with a mouse keyboard and monitor. When you need to hit the field just pull it from the dock and you have your office in your hands.


Until recently, the vast majority of commercial, topographic lidar systems operating in North America used 1064 nm lasers. However, systems employing erbium-doped fiber lasers operating at 1550 nm are becoming increasingly prevalent. An advantage of this wavelength is enhanced eye safety, as greater water absorption in the ocular components at wavelengths above 1400 nm prevents radiation from reaching the retina. However, for related reasons, 1550 nm lidar systems may be subject to a greater decrease in signal-to-noise ratio (SNR) when the ground surface is wet. When operating near the upper limits of the system's operational altitude range-as is often done in order to maximize acquisition efficiency and minimize costs-this reduced SNR can lead to drop-outs and data gaps. The U.S. National Geodetic Survey (NGS), a program office of the National Oceanic and Atmospheric Administration (NOAA), uses lidar for coastal mapping applications. One of the primary goals is to extract tide-datum based shoreline, which is used in updating nautical charts, defining legal boundaries, and in a variety of coastal science and geomorphology studies. Mapping a tidally-referenced shoreline from topographic lidar data typically involves acquiring the data over exposed areas of the intertidal zone at low tide. Even when not submerged, these areas are frequently wet from the receding tide, wave runup, etc. If not compensated for through appropriate flight planning, the additional decrease in SNR with 1550 nm systems, due to the surface being wet, can lead to sparse, noisy data or even data voids, affecting the ability to extract a tidally-referenced shoreline. This study focuses on a theoretical and empirical investigation of 1550 nm lidar systems for coastal mapping. Lidar data were acquired over Assateague Island, Maryland with a new, dual Riegl LMS-Q680i system at a variety of flying heights. Additionally, reflectance spectra were acquired with a field spectrometer for various East


The talk will present the concept and observation results of three advanced lidar systems developed recently at the Swiss federal Institute of Technology- Lausanne (EPFL) Switzerland. Two of the systems are Raman lidars for simultaneous water vapor, temperature and aerosol observations and the third one is an ozone UV DIAL system. The Ranan lidars use vibrational water vapor and nitrogen signals to derive water vapor mixing ratio and temperature, aerosol extinction and backscatter are measured using pure-rotational Raman and elastic signals. The first Raman lidar (RALMO) is a fully automated, water vapor /temperature/aerosol lidar developed for operational use by the Swiss meteorological office (MeteoSiss). The lidar supplies water vapor mixing ratio and temperature plus aerosol extinction and backscatter coefficients at 355 nm. The operational range of the lidar is 100-7000 m (night time) and 100- 5000 m (daytime) with time resolution of 30 min. The spatial resolution varies with height from 25 to 300 m in order to maintain the maximum measurement error of 10%. The system is designed to provide long-term database with minimal instrument-induced variations in time of the measured parameters. The lidar has been in regular operation in the main aerological station of Meteoswiss- Payerne since September 2008. The second Raman lidar is a new generation, solar-blind system with an operational range 10-500 m and high spatial (1.5 m) and temporal (1 s) resolutions designed for simultaneous humidity, temperature, and aerosol measurements in the lower atmosphere. To maintain the measurement accuracy while operating with fixed spatial and temporal resolution, the receiver is designed to provide lower than ten dynamic range of the signals within the distance range of the lidar. The lidar has 360 azimuth and 240elevation scanning ability. The lidar was used in two field campaigns aiming to study the structure of the lower atmosphere over complex terrains and, in particular


As a follow up to OpenCon 2014, International Federation of Medical Students' Associations (IFMSA) students organized a 3 day workshop Open Access, Open Education Resources and Open Data in Kampala from 15-18 December 2014. One of the aims of the workshop was to engage the Open Access movement in Uganda which encompasses the scientific community, librarians, academia, researchers and students. The IFMSA students held the workshop with the support of: Consortium for Uganda University Libraries (CUUL), The Right to Research Coalition, Electronic Information for Libraries (EIFL), Makerere University, International Health Sciences University (IHSU), Pan African Medical Journal (PAMJ) and the Centre for Health Human Rights and Development (CEHURD). All these organizations are based or have offices in Kampala. The event culminated in a meeting with the Science and Technology Committee of Parliament of Uganda in order to receive the support of the Ugandan Members of Parliament and to make a concrete change for Open Access in the country.


Background Providers and policymakers are pursuing strategies to increase patient engagement in health care. Increasingly, online sections of medical records are viewable by patients though seldom are clinicians' visit notes included. We designed a one-year multi-site trial of online patient accessible office visit notes, OpenNotes. We hypothesized that patients and primary care physicians (PCPs) would want it to continue and that OpenNotes would not lead to significant disruptions to doctors' practices. Methods/Design Using a mixed methods approach, we designed a quasi-experimental study in 3 diverse healthcare systems in Boston, Pennsylvania, and Seattle. Two sites had existing patient internet portals; the third used an experimental portal. We targeted 3 key areas where we hypothesized the greatest impacts: beliefs and attitudes about OpenNotes, use of the patient internet portals, and patient-doctor communication. PCPs in the 3 sites were invited to participate in the intervention. Patients who were registered portal users of participating PCPs were given access to their PCPs' visit notes for one year. PCPs who declined participation in the intervention and their patients served as the comparison groups for the study. We applied the RE-AIM framework to our design in order to capture as comprehensive a picture as possible of the impact of OpenNotes. We developed pre- and post-intervention surveys for online administration addressing attitudes and experiences based on interviews and focus groups with patients and doctors. In addition, we tracked use of the internet portals before and during the intervention. Results PCP participation varied from 19% to 87% across the 3 sites; a total of 114 PCPs enrolled in the intervention with their 22,000 patients who were registered portal users. Approximately 40% of intervention and non-intervention patients at the 3 sites responded to the online survey, yielding a total of approximately 38,000 patient surveys. Discussion 350c69d7ab


About

Welcome to the group! You can connect with other members, ge...
Group Page: Groups_SingleGroup
bottom of page